How to make bootable pen drive


In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.

How to Create Bootable Pendrive using CMD(Windows Command Prompt)

Format the flash drive. Type format fs=fat32 quick into Command Prompt, then press ↵ Enter. If you encounter an error in the USB creation, repeat this process using the format fs=ntfs quick command instead.

How to Create Bootable Pendrive using CMD(Windows Command Prompt)

Note : When you start your PC for the first time, the portable Windows will need a bit more time to boot, since the hardware first has to be detected. While it’s being detected, Windows may also restart several times.

How to Create Bootable Pendrive using CMD(Windows Command Prompt)

There are lots of uses for a bootable USB drive. The most important is, of course, booting the PC if it will no longer start itself because of a virus, serious system failure, defective hard drive, or partition problems. The small piece of hardware is the standard solution for hosting an entire operating system and/or a recovery system like the multi-virus scanner Sardu and using it to successfully reboot and repair the computer. Sardu contains 20 virus scanners that can be installed on a USB drive.

Comments

Popular posts from this blog

How to crack android mobile pattern lock without software

How to use drone camera

How to upgrade ram in laptop